0
Engineers refer to it as high speed steel.
Wiki User
∙ 6y ago
Add your answer:
Earn +20 pts
How are hacksaw blades measured?
how to measure the width of a hacksaw blade
What does a junior hacksaw cut through?
A junior hacksaw is simply a small hacksaw. There are not so many choices for blades, however it can do essentially anything that a full size hacksaw does, but in a smaller space.
What can you use instead of buying a lock picking kit?
Hacksaw blades are a good alternative.
What is the other metal in high speed steel bi metal machine hacksaw blades?
carbide????
Where can you find a lock picking set?
you can either make your own out of hacksaw blades, or you can buy them from various retailers online, they are not hard to find just do a google search. Making lockpicks from hacksaw blades is easy if you have a bench grinder, otherwise it might be worth it to buy them online.
What is the proper manner in which a hacksaw blade should be inserted on a hacksaw frame?
The teeth should point forward, as is the case with most saws.
How many strokes per minute is a comfortable cutting speed for a hacksaw?
Strokes 50 strokes a minute is recommended when using low tungsten blades, and 60 strokes a minute is recommended when using high speed steel blades.
What is the difference between a junior hacksaw and a hacksaw?
The hacksaw is bigger than the junior hacksaw
What does a hack saw do?
A hacksaw is used to cut metals. The blades are easily changeable and come in many tooth sizes. Very hard metals like tool steel need many small teeth, so here you would fit a very hard 32 or 36 tpi blade (teeth per inch). Softer metals can be cut with cheaper blades with teeth of about 12 -16 per inch.
What is a regular hacksaw?
Most probably this refers to a hand hacksaw, which uses blades of about 10 inches or so. The blades are made with various different number of teeth per inch.Commonly, from about 18 t.p.i, to 24 t.p.i, which would be used for cutting thin tube or sheet metal. There are also some small hand hacksaws with blades of only about 6 inches, for light work, or confined spaces.Blades are also made with 'variable pitch' running from 24 t.p.i. at one end of the blade, to about 18 t.p.i. at the other. These are very useful, as it is easier to get started with the fine pitch, then to move on to the coarser pitch at full stroke, once the cut has been established.Metal cutting saws are also made as band saws, and as reciprocating saws.
What is a hacksaw made from?
depends on who makes them, however most are made from alloyed steel. It is made from carbon steel or from high speed steel, a costlier but better option. The frames are usually of steel, sometimes plastics are used on cheaper versions. The blades, as stated are HSS., with a variable number of teeth per inch depending on its use.
Who is inventor of hacksaw?
who is inventor of hacksaw
