0
What is the other metal in high speed steel bi metal machine hacksaw blades?
Billblack56
carbide????
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What is a body that attracts other metal?
Metal
What is a high concentration of the other metal in the mesosphere?
what is the high concentration of the other metal in the mesosphere
What happens if you stick a knife into an outlet?
Warning - sticking any metal object into a power outlet can cause severe injury or death!An AC power outlet can short or ground out if a metal object touches or nears the contact blades inside. You could be electrocuted. Never place any object other than an intact, approved electrical plug into a power receptacle.
What are other objects that are often arranged by their properties?
metaloid and metal
Is polonium metal or non-metal or metalloid?
No, it is not a metalloid. Plutonium is a metal, as are the other elements in the actinide series.
Which tool is the best for cutting big metal rods?
The metal rods are more hard, so to make a cut is not easy with the hand tools. We can use the best of the above: You may need to cut a metal rod for a host of applications, and general tools may not do the trick. The consistent method is with a metal hacksaw. Cutting a rod is a good way to learn how to work with metal. The cutting method should work with minor modifications for other metals. >> Mark the rod >> lock rod >> spray some lubricant >> start pushing and pulling your hacksaw >> finished Using this angle grinder is by far the best tool for cutting any kind of all-thread. It's has some easy steps to make a cut. >> Place a mark on the rod >> Lock rod >> Fix the disc in the machine >> Starts machine and make a cut >> Finished Using hacksaw it takes time for making the cut, but on the other hand it is an economic tool as the cost of cutting is low as compared to machined. Angle grinder can reduce your effort while making cuts. It will cut faster than hacksaw but the cost of cut is more than a hacksaw. So, As per me for cutting big hard metal rods one should use grinder machine. for more visit Bipico Industry
What is the uses of grinder?
Bench grinders are used most for sharpening blades of various kinds -- chisels, mower blades, hoes, etc. They can also be used for smoothing/deburring metal parts cut with another tool, such as a hacksaw. You can put other kinds of wheels on them. A wire wheel can be used for cleaning rust or paint off of objects that can be held against the wheel. A cloth weel can be used with polishing compound to polish objects.
Is a hack saw a compass saw or a dovetail saw meant to cut metal?
A hacksaw is meant to cut metal. -The other 2 mentioned, compass saw and dovetail saw are both for woodwork.
What is the use of bench grinder?
Bench grinders are used most for sharpening blades of various kinds -- chisels, mower blades, hoes, etc. They can also be used for smoothing/deburring metal parts cut with another tool, such as a hacksaw. You can put other kinds of wheels on them. A wire wheel can be used for cleaning rust or paint off of objects that can be held against the wheel. A cloth weel can be used with polishing compound to polish objects.
What is a regular hacksaw?
Most probably this refers to a hand hacksaw, which uses blades of about 10 inches or so. The blades are made with various different number of teeth per inch.Commonly, from about 18 t.p.i, to 24 t.p.i, which would be used for cutting thin tube or sheet metal. There are also some small hand hacksaws with blades of only about 6 inches, for light work, or confined spaces.Blades are also made with 'variable pitch' running from 24 t.p.i. at one end of the blade, to about 18 t.p.i. at the other. These are very useful, as it is easier to get started with the fine pitch, then to move on to the coarser pitch at full stroke, once the cut has been established.Metal cutting saws are also made as band saws, and as reciprocating saws.
What are bley blades?
They are other known as Ninja Stars or they can be related to the new toy and TV show "Beyblade: Metal Fusion"....
What machine gun the worlds fastest machine gun?
The Metal Storm is the World's fastest machine gun. It fires 1660 bullets in every second up to 1 million rounds per minute without having someone to crank it up. The Metal Storm can be an unmanned machine gun and can open fire automatically because the computer is operating the machine gun. No other machine gun in the World can fire as fast as the metal storm at that kind of firing speed. Metal Storm is one of the fastest machine gun in the World and can fire more bullets much faster than other machine guns. Metal Storm is not an actual machine gun. It is a volley gun. See the Related Question below for a better discussion of what a real machine gun is, and which has the highest rate of fire.
What inventions were at the great exhibition in 1851?
Engines that can pump water, Engines that can operate other machinery, a knife with three-hundred blades, a freezing machine and other types of machines
Safety rules when using a hacksaw?
A hacksaw is a manual saw that consists of a metal frame for securing a narrow, toothed blade and can be used for cutting wood, metal, plastic and other materials. Hacksaws are used in a broad array of applications ranging from plumbing to butchering. Although hacksaws are relatively safe compared to electric or gas-powered saws, precautions are still necessary to ensure safety and proper cutting. Blade Type· Different hacksaw blades are available for various materials and material widths. The appropriate blade should be used to keep the saw from getting caught up in the material, which can cause jolting, unsafe sawing motions and irregular cuts. Blades with a greater ratio of teeth per inch (TPI), such as 10 or higher TPI blades, should be used for cutting thin materials that are 1-inch thick or less. Blades with a medium, 6 to 8 TPI ratio should be used for thicknesses between 1 inch and 4 inches. Blades with a low, 4 to 6 TPI ratio should be used for thicknesses greater that 4 inches. Use a carbon steel blade for cutting metals such as copper and aluminum and a carbide blade for cutting cast iron, ceramic, masonry or plastic. Use a spiral blade to cut notches and circles.Blade Placement· The blade is secured in the hacksaw with the angle of the teeth facing forward--moving away from the handle. This allows you to cut the wood on the strokes that move away from you. Make sure that the nuts that hold the blade in place are tight so that the blade will not come loose, dislodged or jammed in the material being cut. Securing the Material· Whether you are cutting flat material or pipes, the material should be secured on a worktable with vice grips or clamps. Securing the material will prevent it from shifting and causing dangerous jams and jolts of the hacksaw. Handling the Hacksaw· A hacksaw user should hold the handle of the hacksaw firmly, like you would hold the handle of a pistol--with your fist wrapped around the handle and your forefinger pointing forward. The forefinger pointing forward and placed securely against the side of the hacksaw frame provides extra stability. The other hand can optionally be place on the front of the hacksaw blade to provide even more stability as well as to input more strength into the sawing motions. Push down on the saw for cutting only on forward strokes. Use strokes that are long, matching the majority of the blade length, and do not rush or use inconsistent or short and choppy strokes.
How do scissors work?
Two pivoted metal blades connected through a joint in such a way that the sharpened edges slide against each other and cut the material.
Why is metal used to make the blade of a knife?
Metal is most commonly used for the blades of knives due to it's strength, edge retention, and how manipulatable it is. Companies can blend all sorts of metals together and temper it differently to achieve exactly the cutting performance that's intended for the knife. There are other materials out there for blades, but as of right now, nothing is more versatile, recyclable, maintainable, etc, than metal.
When were machine guns made and how?
They are still made, and are made like any other firearm- by machining metal parts.
