20 degrees Celsius is 68 degrees Fahrenheit; but I like it cooler than that in the Winter.
Where are you getting this specific heat number. With the other numbers there is no cancellation.
Usually it is a machine for reducing the temperature of the air inside a house or car by using a heat-pump that works on the same principle as a refrigerator. It just makes your house a big refrigerator that you sit inside.
No. First, the water will never be hotter than 212 degrees F (or 100 degrees Celsius). Above that, it becomes steam. Secondly, much of the heat output goes up the chimney.
If the basement has ventilation to outside, the answer is yes. Heat loss from the pipes will escape outside the house. If the basement is closed to the outside then no, the pipes need not be insulated. Any heat lost from the pipes will provide some heating to the basement that will rise into the house.
Electricity does work (W =I2Rt) ) on a conductor, causing its internal energy (U) to rise. This rise in internal energy is accompanied by a rise in temperature, resulting in heat transfer (Q) from the conductor to the surroundings. It should be pointed out that the term 'heat energy' is no longer used -heat is simply energy transfer caused by a difference in temperature.
Celsius measures temperature.
Celsius is in reference to temperature.
the temperature mat should be around 76 c unless if it is new to the house, that temperature should be 76c.
It is a temperature of heat at 105 degrees Centigrade or Celsius
Temperature conversion as a measure of heat for 17.6 K to celsius is -255.55 Celsius
heat will flow from the iron to the water until both are the same temperature
heat energy required to raise the temperature of ice by 29 celsius =specific heat capacity of ice * temperature change *mass of ice + to change 1kg of ice at 0 celsius to water at 0 celsius =specific latent of fusion of ice*mass of water + heat energy required to raise the temperature of water by 106 celsius =specific heat capacity of water * temperature change *mass of ice + to change 1kg of water at 106 celsius to steam at 106 celsius =specific latent of fusion of ice*mass of steam
Enthalpy is the measurement of heat, Joule (J) is the unit. Temperature is not a measurement of heat. Temperature has the unit Kelvin (K) or Celsius (oC)
Enthalpy is the measurement of heat, Joule (J) is the unit. Temperature is not a measurement of heat. Temperature has the unit Kelvin (K) or Celsius (oC)
Enthalpy is the measurement of heat, Joule (J) is the unit. Temperature is not a measurement of heat. Temperature has the unit Kelvin (K) or Celsius (oC)
Heat capacity is the amount of heat needed to increase the temperature of an element (a given mass) by a temperature unit.Specific Heat Capacity is the amount of heat in Joulesneeded to heat 1kg of an element by 1 degree Kelvin.Joules per Kilogram KelvinIf the SHC of water is higher than that of iron, it means, you need more heat to increase the temperature of 1kg of water in 1 degree Celsius, than the heat you need to increase the temperature in 1 degree Celsius of the same mass of iron.P.S.A Celsius temperature difference is the same as a Kelvin temperature difference. In measuring SHC, we only need to focus on temperature difference rather than the temperature value. Add 273.15 to the Celsius measurement of the temperature to get the Kelvin temperature value.
The temperature for broiling in an oven is 260 degrees Celsius or 500 degrees Fahrenheit. Medium heat is about 177 degrees Celsius or 350 degrees Fahrenheit.