Remove the wiper arm from the base. Some use a screw, and or, are just pressed on to the Knurled base stud. You can pry it off by lifting up with a flat bladed screwdriver. Make sure that the wipers were turned to the off position, when the engine was turned off. Then with the arm removed, reposition the arm, so that the blade is again resting on the bottom of the windshield, and press the arm back onto the knurled stud. replace screw (if any), and your back in business, with the wipers in the right position, when shut down.
The term "multi-function switch" on a vehicle usually refers to the stick (or sticks) on the steering column that controls turn signals, wipers, cruise control, etc.
There is a 13mm nut at the bottomof the wiper arm take it of and pry up on the arm where you took the nut off and put the arm back on where you want it to line up.
Carlo Di Carlo was born on June 18, 1938, in Bologna, Italy.
Carlo Ponti was born on December 11, 1912.
Carlo Ambrosoli has written: 'Carlo Ambrosoli'
Carlo Frappi has written: 'Carlo Frappi'
Carlo Bazzani has written: 'Carlo Bazzani'
Carlo Mazzi has written: 'Carlo Mazzi'
Carlo Baratelli has written: 'Carlo Baratelli'
Carlo Conte has written: 'Carlo Conte'
Carlo Marchionni has written: 'Carlo Marchionni'
Carlo Cesta has written: 'Carlo Cesta'