DOS apps typically used their own print drivers, so unless you're printing just plain text, without any formatting/font/size/color info, then you may run into some funky results, unless you can configure your model of printer within your DOS app. Also, most printers these days use either the USB port, or may even be networked - either to another computer, a router, or wireless - all of these technologies are post-DOS, so your DOS app may not understand the port that your printer is physically connected to. My advice would be to contact the support division of your DOS app, or if none exists, investigate a Windows based alternative that will do the same job for you. If all else fails, it might be possible to tell your DOS app to "print" to a file. Then you would need to open the file from within Windows, and print to your printer. For this method though, it will be easier if the file is just a straight text file, with (again) no formatting. Hope this helps some. Cheers!
the print manager group
Browse for a printer on a network Install a printer that supports Plug and Play Search for a printer in Active Directory
I am sharing a Dell Photo AIO Printer 926 running on an XP computer with a computer on the network running Windows 7. When I started, the printer was already installed and working on the XP computer and set up to be shared on the network. Then I ran the 926 printer installation disk (the disk that came with the printer) on the Windows 7 computer. At some point it asked me if the printer was connected to another computer on the network. When I answered "yes" it asked for the name of the other computer on the network and the shared name of the printer. After I answered those questions it proceeded to "install" the printer as if it was connected to the Windows 7 machine and it works perfectly. I was surprised that worked, after having tried many times (unsuccessfully) to connect to it by installing new drivers on the Windows 7 computer. So I would suggest using the printer installation disk on the Windows 7 computer. If you do not have the disk I would suggest trying to get one from the printer manufacturer.
The printer itself Connectivity between the PC and its local printer Connectivity between the PC and a network printer The OS and printer drivers The application attempting to use the printer This is question 8 from chapter 11 in Jean Andrews' A+ Guide to Software. The answer is the subheadings in green that begin on page 627 and end on 630. 1. Problems with the Printer itself 2. Problems with a local printer cable or port 3. Problems with connectivity for a network printer 4. Problems Printing from Windows
Either the network is down, the printer cable is not connected properly, the Windows print spool is stalled, or you have the wrong printer drives installed. The question above says that this is a local printer not a network printer.
Ethernet
You have to network your computers. In order to that (if you have windows) go to Start-->Control Panel-->Network Setup Wizard and go from there. Once you've set up your network, just add the printer to each computer. To do this go to Start-->Control Panel-->Printers and Faxes-->Printer Tasks-->Add a Printer.
Standard TCP/IP Port
File and Print Sharing
If you mean what is the purpose of sharing a printer via Samba on Linux, the answer is the same as why you would share a printer between Windows machines. To make the printer accessible to other users on the network.
Lots of printers work with Windows 98. Generally speaking, any printer that connects via a parallel port, or that can be printed to over a network will work. USB printers may or may not work, depending on their age. You should check the printer manufacturer's site to see what operating system it is compatible with.