Want this question answered?
High resistance on the feeder to the load will cause voltage drop at the load end of the circuit. If this is happening, do the calculations for voltage drop, using the amperage of the load, voltage of the load, the size of the wire feeding the load and the distance from the distribution panel to the load.
Change the fuse controlling the control panel lights. You need to check wire harness around the panel because you have to high voltage in the circuit.
Di-Electric oil to cool the windings inside the transformer, There is a primary winding(high voltage) and a secondary winding(Lower Voltage), Usually stepping down the voltage to about 170 Volts for residential houses, It about 120 Volt by the time it gets to your panel.
Di-Electric oil to cool the windings inside the transformer, There is a primary winding(high voltage) and a secondary winding(Lower Voltage), Usually stepping down the voltage to about 170 Volts for residential houses, It about 120 Volt by the time it gets to your panel.
Transformers are used to convert electricity from high voltage to low voltage and from low voltage to high voltage.
Medium voltage is over 1000 v, high voltage is over 45 kV.
High Voltage Software was created in 1993.
The population of High Voltage Software is 95.
High Voltage Festival was created in 2010.
the inductive load which is generally use in high voltage transmission line known as transformer. the transformer transform the high voltage to low voltage.
High Voltage - song - was created in 1975-07.
In electricity? High voltage ,high currents. Low voltage, low currents.