Physical address in the 8086/8088 is {Selected Segment Register} * 16 + {Effective Offset Address}. It is a 20-bit address
.
segment is for converting physical address to logical address , here on taking 8086 microprocessor as example, we have 20 address lines but it is capable of taking only 16 address lines.... so to convert that 20 into 16 segment is used....
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
for demultiplexing address/data bus
Its 16bit microprocessor,and-> the 8086 has a 16bit databus 20bit address bus-> the intel 8086,is designed to operate in two modes namely(1) minimum mode(2) maximum mode
The 8086 microprocessor has 40 pins.
The Instruction Pointer (IP) in an 8086 microprocessor contains the address of the next instruction to be executed. The processor uses IP to request memory data from the Bus Interface Unit, and then increments it by the size of the instruction.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
The 8086/8088 microprocessor has a 20 bit address bus, so the number of memory locations it can address is 220 or 1,048,576.
Effective address is the final address generated by offsetting and indexing which is sent to the virtual translation logic. It is the address of the operand in the virtual address space of the process, but not necessarily the address of the operand in the physical address space of the computer. In the 8085, efffective/virtual address is the same as physical address, because there is no virtual addressing logic in the 8085. In the 8086/8088, effective/virtual address is the same as physical address, but only in real mode. For example, in the 8086/8088, if the EBX register contains 1000000H, then the instruction MOV EAX,[EBX+1234H] has an effective address of 10001234H.
it is a 16 bit microprocessor & it has 40 pin .
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).