the advantages of 8086 microprocessor over 8085A microprocessor is that
1)it is a 16 bit microprocessor
2)the disadvantages in 8085A microprocessor like low speed,limited number of registers,low memory addressing capability,less powerful instruction set have been overcome in 8086 registers
The 8086/8088 is a 16 bit processor. As such, it can handle 16 bit logic and arithmetic, while the 8085 can only handle 8 bit data. Also, the 8086/8088 has a 20 bit address bus, so it can address 1mb of memory, while the 8085 can only address 64kb of memory. Also, the 8086/8088 has additional instructions that greatly enhance the processing of data, such as indexed addressing and string manipulation.
The original IBM PC was implemented using an 8088 processor. At that time, that was something special.
the 8085 does not have segment register.........
Intel 8086 is not better than 8085 but rather more preffered to it. This is because Intel 8086 provides an order of magnitude increase in processing.
The advantages of the 8086 microprocessor was the processor was small enough for the individual user. The disadvantage of the processor was the limited uses.
The 8086 microprocessor has 40 pins.
It is mightily referring to Microprocessor 8086 . I think you saw "8086 microprocessor". The 8086 is nothing it indicates the number of microprocessor same as Digital or analog ic's . 8086 microprocessor has 20 Address buses and 8 data buses which has 1 Mb inbuilt memory for performing several type of airthmatical and logical operation.
queue of 8086 microprocessor is 6 bits
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
it is a 16 bit microprocessor & it has 40 pin .
Pins 1 and 20 in the 8086 microprocessor are (both) power and signal ground (GND).
8086 main application is to evaluate the arithmetic operations in any systems that uses 8086
Two ground pins are used in the 8086 microprocessor to increase the bus pull-down current capacity.
Which microprocessor accepts the program written for 8086 without any changes?
Its 16bit microprocessor,and-> the 8086 has a 16bit databus 20bit address bus-> the intel 8086,is designed to operate in two modes namely(1) minimum mode(2) maximum mode
The advantages of downloading the main program into a microprocessor based system can be it can cause the system to run efficiently and the main program will be able to be easily accessed through the microprocessor system. Disadvantages can be due to errors they can happen due to system failure.
ya possible