Half or twice as long, depending on which direction you move.
Stops are like octaves in music. One stop is twice as large as the preceding one. So five stops represents 32 times (32x) as large, for example.
One stop means twice as large (in one direction) or half as large (in the other direction).
Moving the speed up one stop makes the shutter stay open half as long as it did before the move.
If the camera has a "shutter priority mode", usually called "S mode", then the shutter speed is controlled directly by the user when the camera is in this mode, by moving a dial or pressing a button (or both). If the camera has a "manual" mode, usually called "M mode", then the shutter speed and aperture are both controlled directly by the user by moving dials or pressing buttons (or both). Some cameras have automatic modes which allow the user to control the minimum and maximum shutter speeds that will be selected by the camera when considering all other factors. If the minimum shutter speed is reached, the camera will increase the ISO or aperture size to compensate for under-exposure. If the maximum shutter speed is reached, the camera will decrease the ISO or aperture size to compensate for over-exposure.
All cameras have multiple shutter speeds and depending the mode your camera is (Manual, Auto, etc...) the camera will choose what shutter speed it thinks will be appropriate for the picture. And most cameras will also not tell you the shutter speed you used, while some will.
When using a Nikon 42x P510 camera it is very easy to slow down the shutter speed. On the side of the camera there is a dial that you can access to slow or speed up the shutter speed.
Exposure, in digital or film photography, is determined by aperture and shutter speed. On a manual camera, the user selects both values.On an automatic camera, there are four possibilities:Manual mode. User selects both aperture and shutter speed.Shutter priority. User picks the shutter speed and the camera adjusts the aperture to ensure proper exposure.Aperture priority. User picks the aperture and the camera adjusts the shutter speed to ensure proper exposure.Program mode. The camera selects both values.
When the higher or lower shutter speed either renders motion in an unacceptable way (depending on the subject matter) or the lower shutter speed is too slow for hand-holding the camera.
If the camera has a "shutter priority mode", usually called "S mode", then the shutter speed is controlled directly by the user when the camera is in this mode, by moving a dial or pressing a button (or both). If the camera has a "manual" mode, usually called "M mode", then the shutter speed and aperture are both controlled directly by the user by moving dials or pressing buttons (or both). Some cameras have automatic modes which allow the user to control the minimum and maximum shutter speeds that will be selected by the camera when considering all other factors. If the minimum shutter speed is reached, the camera will increase the ISO or aperture size to compensate for under-exposure. If the maximum shutter speed is reached, the camera will decrease the ISO or aperture size to compensate for over-exposure.
When you add a camera lens to a camera, it does not make the shutter go faster. If the camera has a manual way to adjust the shutter speed, that is how it changes.
This will depend on what you are shooting. If you are shooying water a slow shutter speed will do - if it's sports photography you will need a fast shutter speed. The shutter is a mechanical device that controls the length of time that light is allowed to act on the film. With a shutter speed of 1/125 you shoud avoid blur if the subject is not moving. Any speed under this your camera should be placed on a tripod. www.goldprints.com
Shutter speed is how fast your shutter opens and closes to take a picture on your camera. Shutter speed also has a lot to do with exposure. The higher the shutter speed (1/2000 example) the less light.
the shutter speed is how fast the shutter can go eg. an dslr has a faster shutter speed than a digital camera the shutter is a part on the camera that opens and closes when it opens it draws the light from the object focused on and places it on the lcd screen of film giving you your pic
It depends on what camera your using
All cameras have multiple shutter speeds and depending the mode your camera is (Manual, Auto, etc...) the camera will choose what shutter speed it thinks will be appropriate for the picture. And most cameras will also not tell you the shutter speed you used, while some will.
shutter speed
It depends on what camera you are using.
If the camera is in an automatic or programmed mode, yes, the shutter speed will be changed by the on-board metering system if the aperture is changed. If it's in a manual mode, no.
The highest shutter speed available to you will give you the darkest exposure, while the lowest shutter speed available will give you the brightest exposure
Shutter speed has a lot to do with your overall exposure. A higher shutter speed will decrease the light a lot. I was in best buy playing around with a camera and turned the camera shutter speed to 1/4000. After taking the photo, the preview was black. I realized it was because of how much higher I increase my shutter speed. Shutter speed also affects motion in a photo. A higher shutter speed will freeze all action in a photo a will less likely have a blur to it if you have a shaky hand. A lower shutter speed lets in more light while the shutter is will opened so the entire time that the shutter is open, the camera takes in all that light. Increasing chances of blur, you can also use this for crazy, funky effects! If your taking a picture of a waterfall with a low shutter speed, your gonna get a blur, which can typically look pretty epic sometimes too.