A type of "pressure" that drives electrical charges through a circuit. Voltage is how the electric potential energy differences are measured.
the difference between a voltage converter to a voltage regulator,is that a voltage converter,converts or changing the desired voltage to be used while the voltage regulator,regulates the input of the voltage amount not to excess to its inputs.
A voltage DC(direct current voltage) is a uni-direction steady voltage. It is the opposite of an analog/alternative voltage which varies in polarity and direction with time.
Voltage stabilizer is use to regulate the voltage the output of any device
Terminal voltage is the voltage gotten at the terminals of the load in any system.
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage is the potential difference between the source & any point in the circuit. The forward voltage is the voltage drop across the diode if the voltage at the anode is more positive than the voltage at the cathode (if you connect + to the anode). Voltage drop means, amount of voltage by which voltage across load resistor is less then the source voltage.
Voltage gain is the ratio of the output voltage of an amplifier to its input voltage.
bucking voltage is a voltage which is of opposite polarity to the voltage it acts .
Voltage Stabilizer is also called Automatic Voltage Stabilizer or AC Voltage Stabilizer or Voltage Regulator. Actually an automatic voltage stabilizer is designed to automatically maintain a constant voltage level, with protections of equipment against voltage surges, over voltage, under voltage, smoothing impulsive noise.
the difference between a voltage converter to a voltage regulator,is that a voltage converter,converts or changing the desired voltage to be used while the voltage regulator,regulates the input of the voltage amount not to excess to its inputs.
the device oprates on the minimum voltage. in this voltage is called threshold voltage.
There is no formula to convert voltage. Voltage is universal.
Voltage amplitude is the maximum value of a voltage.
Knee voltage (cut in voltage) :-The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage Breakdown voltage :-It is the minimum reverse voltage at which the P-N Junction can conduct without damage to the current
Constant voltage
ratio of secondry voltage to primary voltage is called voltage transformation ratio
Voltage is not "used" Voltage is constant.