When an incandescent light bulb (the normal round ones that Thomas Edison invented) is placed into a "hot" circuit, (meaning there is electricity flowing through it), the electricity passes through the filament (little metal wires) on the inside. As the electricity passes through it, the wires heat up and make a chemical reaction causing light to be emitted.
A flow of electric current going through the wire.
The fillement inside the bulb makes it light up. It acts a ressistor and only lets a small bit of electricity through, therefor pressurising the energy which makes it hot and makes it glow.
thermal energy of course. :}
The luminous radiation emitted by the light bulb.
A bulb does not light up if there is no voltage available across the bulb, or if the bulb is burned out.
When a light bulb burns out it no longer makes light. This is because there is no way to connect the flow of electricity.
The bottom of a light bulb is a screw.
The fillement inside the bulb makes it light up. It acts a ressistor and only lets a small bit of electricity through, therefor pressurising the energy which makes it hot and makes it glow.
thermal energy of course. :}
the Sparks on the copper makes the wire on the light bulb makes the 9v light bulb turn on.
Copper, nickel, steel, and metal are factors that makes a bulb light up. Press 1 for more details press backspace for details press backspace for details
The simple machine that makes up the base of a light-bulb is just a screw. That screw allows you to insert the light-bulb into the base of a lamp. You must make sure to get the grooves of the screw lined up to properly tighten the bulb into place.
it makes light
The luminous radiation emitted by the light bulb.
it makes light
a light bulb dummy.
argon is an element that make up a light bulb
The bulb contains electomagnetic waves that makes the bulb light.