basic tools are all that are needed its a simple job. They are disc type brakes.If you can do the front, then you can do the rear.
what tools are needed
Changing your own front brake pads can save hundreds of dollars. Tools needed for the job are a jack, the brake pads, lug wrench, socket wrench, and brake fluid.
ratchet or socket
To change the brake pads on a 1991 Chevrolet Caprice, you will need some tools. You're going to need a c-clamp, a hex key or Allen wrench to remove the calipers, and a wrench to bleed the lines.
You will need a hoist, a socket wrench set and a torque wrench. You will also need the brake pads, brake fluid and brake grease.?æ
Lug wrench, metric socket set, "C" clamp
a rachet a pipe and some patience
Only take apart one wheel at a time so that you will have the other wheel to use for comparison. A few basic inexpensive brake tools would be helpful. Ask your local auto parts store to help you with the tools needed.
To change your brake pads check out the following website for step by step instructions. http://www.oqcgp.com/forum/kb.php?mode=article&k=14 Hope this helps. "G"
To replace the brake pads on a Toyota Tercel a jack is needed. Some other tools that will be used are a socket wrench, screwdriver, lug wrench, and a pair of pliers.
A size 14 scket or wrench, and a medium sized C clamp to compress piston in caliper
common metric socket set, brake fluid, brake pads, some of that brake quiet crap auto zone always give you, heavy duty flat head.... a jack, and a little know how, and time