second cylinder back on right bank of engine
The tensile strength of the UH-60L is 9,000lbs this can be found in FM 3-21.38 chapter 5.
standing at your front bumper looking at the engine. #3 cylinder is on PASS side, second cylinder from the fan towards the firewall. XXXXX FIREWALL XXXXX CYL 7 CYL 8 CYL 5 CYL 6 CYL 3 CYL 4 CYL 1 CYL 2 FAN FRONT BUMPER
4 cyl 1342 6 cyl 123456
it will depend on the miles on the engine. So in theory : NEW : 160 200,000 miles probably 130 to 145 range. mainly what you don't wnat to see is this sinerio: cyl #1 135 cyl #2 115 cyl #3 60 cyl #4 110 this would mean possible leaking head gasket, or if cyl #3 shows 0 then 2 bad valves on cyl #3.hope this helps.
for a 4 cyl. its 1-3-4-2 for a 6 cyl. its 1-4-2-5-3-6. the number 1 cyl. is always the one near the timing belt in front of the car same for 4 or 6 cyl.
the metros came with a 1.0 and a 1.3 so it could be either one i would just pop both hoods and look for differances yes the motors are the same. the metro did come with a 1.3 liter but that size is a 4 cyl not a 3 cyl.
4 cyl - 1-3-4-2 6 cyl - 1-4-2-5-3-6
What is the torque for the flywheel nut on mercury 200 h.p. Johngig123's answer; Per the manual I have for Mercury outboards; 4-cyl. models 45, 50, 500 and 650- 65 ft-lb (88Nm) 3-cyl. models 50, 60, 70 650 and 700 - 85 ft-lb (115Nm) 4-cyl. models 75, 80, 800 and 850 - 100 ft-lb (136NM) section of manual data taken from covers; 45hp 4-cyl 1986 & on model 500 4-cyl 1965-79 50hp 4-cyl 1980-1985 50hp 3-cyl 1986-90 60hp 3-cyl 1984-90 model 650 4-cyl 1965-71 model 700 3-cyl 1980-83 75hp 4-cyl 1984-86 model 800 4-cyl 1969-72 model 800 4-cyl 1978-79 80hp 4-cyl 1980-83 model 850 4-cyl 1973-77
I think it's around 60l.
60L
Chevy Tracker 2.0 4 cyl, Infiniti G20 2.0 4 cyl, Lotus Elise 1.8 4 cyl, Nissan Lucino SR20, Daihatsu Charade 1.0 3 cyl, Suzuki Grand Vitara 2.0 4 cyl Acura ARX-02a LMP Prototype
4 cyl, 1-3-4-2. 6 cyl==1-6-5-4-3-2