It is under the outside front corner of the passenger side cylinder head.
It is under the outside front corner of the passenger side cylinder head.
It is under the outside front corner of the passenger side cylinder head.
The crankshaft position sensor on a 3.5L Chrysler Pacifica is located next to the motor, toward the rear. It can be found next to the transmission.
on the back side of the motor close to the oil filter
Passenger side of car at the rear of the motor where the transmission bell housing connects to the motor
The cam sensor on a 2005 Chrysler Town and Country is on the passenger side top of the engine next to where the motor mount bracket attaches.
The Chrysler Sebring knock sensor is located in the engine valve or cylinder located at the back of the motor. This part is in this position next to the engine valve so the sensor can feel the vibration of the engine.
The Crank position sensor is located on the right side behind the wheel about midway up the motor eaiseier to get to from the bottom with 10mm socket one bolt
Location of camshaft position sensor on 2001 toyota avalon 3000 motor
4 cylinder, it is on the driver side end of the cylinder head. 6 cylinder it is under the passenger side motor mount.
The external air temperature sensor on a Chrysler PT Cruiser is located in the front of the motor. It is in the air intake tube that goes from the air cleaner to the motor.
The throttle position sensor is on the throttle body.
That truck still has a distributor, it doesn't have a crank position sensor.
The first step on how to change the motor on a 1992 Chrysler LeBaron V6 3.0l is to position the vehicle to where you can get the hoist in and out.