on the back side of the motor close to the oil filter
The crankshaft position sensor on the PT Cruiser is on the side of the engine above the oil filter. The sensor is removed with two screws. Unplug the wiring, remove the bolts, then install the new sensor.
In the front under the starter you have to get to it from under the car
under starter, above the bell housing bracket, on radiator side of engine!!!
The sensor in the distributor is the crankshaft position sensor.
Possible causes could be,Timing gear misaligned,Faulty crankshaft position sensor,Faulty camshaft position sensor,Engine oil dirty,Incorrect engine oil viscosity,Crankshaft position sensor circuit is open or shorted,Camshaft position sensor circuit is open or shorted,
The crankshaft position sensor on a 3.5L Chrysler Pacifica is located next to the motor, toward the rear. It can be found next to the transmission.
crankshaft position sensor sits in the lower part of the engine somehow on the top of chamber. when you open the chamber which is also called oil pain you will see the crankshaft position sensor.
The crankshaft position sensor mounts to the top rear of the transmission bell housing.
just above the oil filter
The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.The crankshaft position sensor measures the rotational position of the crankshaft for the engine computer. That info is required for fuel and ignition timing.
On crankshaft position sensor, one camshaft position sensor.
Yes, along with many other things.