Behind the dash...you have to remove your glove compartment door, be careful not to set off the passenger air bag.
The 2007 Ford Explorer computer module is located below the dashboard, on the passenger side. The computer module is in a rectangle steel box.
The computer module for the keyless entry system on the 2006 Ford Explorer is behind the rear passenger seat. It is located under the seat belt panel.
The Ford Explorer computer module is located on the firewall under the hood in the center on some models. On other models the computer module is behind the glove compartment. The glove compartment has to be removed (open it as far as possible to pop it off the back hinge) to access the computer module.
The powertrain control module on 1991 and 1992 Ford Explorer is in the right front passenger area behind the right front kick panel
In the Jack compartment on a 1996
the computer module on this vehichile is located in the back of the vehicle. Open the panel where the jacl is stored and look to your right there should be a silver box which is the computer module. Is so cases the door code is located here. there should be a 5 digit number that will unlock the vehicle
If you mean the ECC computer that is located on the passenger side floor kick panel(right below the glove box and to the right)
On a 1994 Ford Explorer, the computer module is behind the kick panel on the passenger front side.
The computer module on the 2002 Explorer Sport is not located in the drivers side rear panel, does anyone know where it is located? On a 2002 Explorer Sport if you are looking for your code or computer then you will have to disconnect the battery and the passenger side airbag cover pull it off and gently remove the airbag by sliding it be careful not to deploy it and there will be the computer directly in front of you the 5 yellow numbers are your key code and this is how you also access the computer, I have a2001 Explorer sport and this is where I found it. Which computer are you looking for? On the 1998 Explorer Sport? The Engine Control Module (ECM) or the Chassis Control Module (CCM) or the Airbag Module (Clock Spring)The answer that the Computer Control Module is under the Steering Column Airbag is the funniest thing I have ever heard. That is the Clock Spring. There is a module under the glove box on the kick panel on the Passenger Side of the 1998 Explorer Sport, behind that plastic molding you see just inside the door on the right-hand floor. It has a plastic clip that holds it in, just reach up to the top of it and tug it out. Be careful, no need to break it but it will come out. In some models it is located behind a metal bracket that holds it in and will need to be unbolted. As with any computer module, Match your S/N with the one you replace it with. We need to know which module is under the plastic cover on the passenger sidewall.
most computer modules are under the dash behind the glove compartment
I am trying to find the 1988 chevy beretta computer module and where is it located?
if you look under the hood faceing the engine it's on the fire wall on the right hand side.