It is in between the cooler hoses on the front of the transmission.
It is in between the cooler hoses on the front of the transmission.
It is in between the cooler hoses on the front of the transmission.
is on the transmission It is the two wire sensor on the same side as the cooler hoses, closest to the engine.
Go to Kragen.com and search for speed sensor. You will find a picture of it.
It is a sensor on the transmission that reads the rotational speed of the input shaft.It is a sensor on the transmission that reads the rotational speed of the input shaft.
The abs wheel speed sensors are at each wheel bearing. The transmission has an input and output speed sensor mounted on the front of the transmission case. The vehicle speed signal comes from the transmission computer via the output speed sensor.
yes the have a speed sensor a input and out put the input allow your transmission to change gears and the output speed sensor allow your speed to register on your speed domitor
They are the two wire sensors on the front of the transmission case. The input is closer to the engine.
It is a two wire sensor on the front, far driver side of the transmission.
The input and output speed sensors are located on the front of the trans. They have two wires and the input sensor is closer to the engine.
The transmission computer uses it to know the rotating speed of the input shaft.
Idle is computer controlled and is not adjustable. If the speed is incorrect there is a sensor or actuator malfunction.
Idle is computer controled and is not adjustable. Id the speed is incorrect there is a sensor or actuator malfunction.
There isn't a vehicle speed signal wire on a 2007 Sebring. The transmission computer uses its input and output sensors to factor vehicle speed. It then transmits that message over the communication wires of the vehicle.