answersLogoWhite

0


Best Answer

It is possible on a 2003 Avalanche for one side of the brake lights to work while the other side does not if there is a ground wire loose. Check the ground wire to make sure it is not loose or corroded.

User Avatar

Wiki User

9y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: Why my 2003 avalanche passenger side brake lights and running lights dont work but turn signal and reverse light does i have replaced the complete tail light assembly and the same thing happens?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How is the complete driver's side headlight assembly on a 1990 Celica ST replaced?

if you need 1 .I have 1 for sale.


2002 Chevy Avalanche 1500 sideview mirror assembly is broken and loose Can you repair it yourself or does it have to be replaced?

If the glass is broken, They make a replacement glass you can by at NAPA it glues in. If the plastic mirror assembly is broken, Then go to junk yard or GM dealer and by a new one. Replace whole assembly.


How do you get thermostat out of plastic neck of housing in a 2001 Daewoo Lanos?

The Complete Thermostat Assembly must be replaced as a unit It CANNOT be dissembled!! Replacement assembly’s are available from “http://www.daewoous.com/”


How do you repair a 99 Silverado front wheel bearing that is bad?

The front wheel bearing assembly is not repairable. A new wheel bearing assembly is replaced as a complete unit. Your local auto parts store can supply you with a new bearing assembly.


Assembly that replaced the Articles of Confederation?

The assembly that replaced the Articles of Confederation was the Bill of Rights.


How difficult is it to replace the crankshaft sensor in 02 Chevy Avalanche?

I have a 2002 Avalanche abd replaced it last year---8.1 liter-----it took my mechanic about 3 hours to get it out/in.


Do anyone know how to install a belt tensioner 2005 dodge neon?

Yes, it is part of the metal plate on the passenger side of the engine that the motor mounts bolts to. The entire assembly will need replaced.


What replaced the Assembly in 1774?

The Provincial Congress


Does the entire system speaker and wiring need replaced to change the radio in a 2003 Chevy Avalanche?

Not in a 2003 Avalanche. Just buy an adapter harness. I paid about 75.00 for mine


How do you change ball joints for a 99 Mazda B3000?

The lower ball joints have to be pressed out. The upper ball joints are part of the control arm, so the complete upper assembly has to be replaced.


How do you remove the antenna mast nut on a 1997 cadillac deville power antenna?

this is replaced as a complete unit installed in the passenger side of the trunk, just pull the side trim out of the way. one 10mm socket and one 10mm wrench. remove the ground srtap bolt from the chassis and unplug the two connectors and pull assembly down out of the rubber.


Can you replace just the bearings on a 1997 dodge 4x4 front wheel assembly?

No, the entire assembly needs to be replaced.