have you tryed all the fuses then check if the bulbs are good
Is the bulb blown?
Turn signal flasher?
I would suspect the signal switch is at fault.
There's a turn signal or running light out on that side, either front or rear. Turn on signal, get out and look. If both turn signals are working, chances are its the running light.
Turn signal flasher?
Check the Fuses real quick. If not it could be related to a computer issue... Thanks Ford lol
Did you change the bulb in the rear? Yes. The hazzard lights use the same bulbs in the rear as the turn signals. They work with the hazzards on but not with the turn signal.
On a 1994 Ford Taurus : The 3.0 and 3.8 liter V6 engines use a timing CHAIN
The 3.0 and the 3.8 liter V6 engines in a 1994 Ford Taurus are fuel injected , so there is no carburetor
you have to replace your turn signal flahser relay, buy one so you will know what you are looking for under dash by steering wheel.
Code 14 means "no IGF signal to the ECM for 4 consecutive IGT signals" which means there is a communication problem between the ECM and distributor...
the hazard lights and turn signals are linked together. make sure your signal arm is entirely linked up to all of the wires it should be. make sure no wires fell down that you didn't notice when the turn signal switch was pulled. you can also check the hazard switch.