When materials heat up they expand.
When they cool down they contract.
If the telephone cable was made tight on a hot day, then they would get very very tight on a cold day, and would stretch (thus making them loose), or perhaps break. Repeated heating and cooling cycles would undoubtedly cause premature failure. Keep in mind that while you may see a large bundle of wires, the individual strands are quite small.
Also, the tension required to keep say a 50 foot or 100 foot stretch of wire from drooping is far greater than the tension required if it is allowed to droop a bit, thus you have less stress on the wires with a little sagging.
One final note. Copper is an excellent conductor, thus is commonly used for phone cables. But, it is heavy, and it is also quite malleable, and thus prone to stretching and deformation which could lead to failure.
Cause a no start situation.
Yes
The first transatlantic telephone cable was completed in 1956
Telephone is Cat3 while the cable coming form the modem is Cat5
Telephone signal is more prone to EMI (Electro Magnetic Interference) effects of Electrical energy flowing through the power cable. To avoid such EMI effects, telephone cable is laid little bit away (300 mm at least) from the power cable.
no
300mm
get it tightened
The cable underneath probably came loose. Have it checked out.
No. Telephone cables have a different kind of connector. Networking cables (also known as Ethernet cables) are also a bit wider then telephone cables.
Our family lives far off the road, so having comcast run the cable would be exorbitantly expensive. Could we hang the cable from telephone poles, or would that cause signal loss?
No. Cable internet is sent over cable lines, while DSL is sent over telephone lines. I know of no company that is both a cable company and a telephone company.