There are a lot of things you would need to do to make it work if it needs to be smog legal. different computer, wiring would be different, motor mounts,I don't know about the tranny. Are the starters on the same side? They put 4.0's in rangers already so all the parts will be readily available. It is very doable and not very expensive.
explorer engine mounts removal
Yes it can with enough money and experience with custom wiring, fuel, and engine mounts. You will pretty much need the explorer as a donor. I am assuming you are talking about the 5 liter. I have done that in a 98 so it was a little easier since dash and wiring are similar....good luck!
Most likely worn engine mounts or transmission mount.
The 1995 Dodge Neon engine mounts are located on each corner of the engine. There will be to engine mounts in the front and two engine mounts in the rear.
You may have to relocate the engine and gearbox mounts but with a little patience I did.
It is possible, some minor tweaking is necessary to make the engine mounts fit and also the drive axles but it is a fairly simple swap, you can even use the accent's tranny with the tib's engine. Also you will need to use the ECU that comes with the tiburon engine since the accent's ECU will not work with the 2.0 litre engine.
it has 4 mounts , 2 engine mounts, and 2 transmission mount
how many engine mounts are there on a 1991 corolla.
check
Chevrolet engine mounts are two-piece designs, whereby one piece attaches to the engine and the other to the frame. Motor mounts are fairly durable, but old mounts can break when subject to heavy acceleration. Fortunately, the engine does not have to be removed to remove the mounts.
how do you remouve engine mounts on 1995 Hyundai sonata
2 mounts