Yes, pipe plugs from a hardware store will work just fine.
The intake heater is the square block between the air horn and the intake manifold.
nope. Block heater is just to heat the block and intake
The OEM style block heater I have for the 1.0L 3 cylinder mounts on the outside of the engine under the intake manifold. An external block heater.
Between the intake and the engine block
intake gaskets are between the head and intake. head gaskets are between the head and the block..
The Toyota Camry block heater is located on the front of the engine block. You can follow the block heater cord to the block heater.
if block heater has never been used, you will find the cord bundled up and hidden between radiator and grill
one of them will go in the water pump and the other will go in the intake
A block heater is not standard equipment.A block heater is not standard equipment.
you may have to remove the intake from the block and then use an extractor tool to remove the rest. then replace the connector.
Remove and engine block expansion plug. Insert the block heater. Seal the block heater. Attached the wiring harness to the block heater.
The 2002 PT Cruiser block heater is located on the front of the engine block. You should be able to follow the block heater cord to the block heater.