answersLogoWhite

0


Best Answer

Sounds like you've had a belt brake! check your engine bay

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: You were driving your car and you heard a ting noise from the engine then right when you heard it your battery gauge went to 10 volts and your steering went stiff?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What makes the check gauge light come then the battery gauge rolls from side to side?

What year is your car? Did you mean the CHECK ENGINE light? The battery gauge?


What gauge battery cable do you use for a 1990 GMC truck engine?

4 gauge wire.


Where is the location of the check engine light on a 1996 ford ranger?

Check engine light : Gauge cluster without tachometer ( under the engine oil pressure gauge ) Gauge cluster with tachometer ( just to the left of the battery voltage gauge )


What does the check gauges light mean on a 1994 Chrysler LeBaron?

It means that one gauge is not in the safe zone. Check the engine temp, oil pressure, battery/alternator voltage,It means that one gauge is not in the safe zone. Check the engine temp, oil pressure, battery/alternator voltage,


What does the check gauges light mean on your 97 ford ranger?

It means at least one of the gauges is out of its normal range. The "check gauge light" is notifing you to take notice with either the engine temp gauge, the battery gauge or the engine oil pressure gauge.


How do you check power steering pump pressure?

First, gauge connect with pressure line and return line. then turn on engine. you will see the rate of flow and pressure on gauge.


Does 1999 mercury mystique have an alternator warning light?

There is a battery light above the engine temperature gauge


Why did your RPM gauge stop working?

while driving the rpm gauge work perfect, when start accelerating the rpm can not exceed 3 with interruption in the engine


Why does a battery gauge moves up and down while the engine is running?

A battery gauge "moves up and down" while running because of fluctuations in the voltage output of the circuit which it is connected to. This may be because of equipment on the circuit.


What would cause the battery gauge in a vehicle to move when you use your power mirrors?

The battery gauge in a vehicle will move when you use your power mirrors as your causing a small drain on the battery & lowering the voltage slightly. The effect is normally only really visible when the engine is not running.


Why will your 1998 Chevy S-10 not start when you turn the ignition you only get a battery light and no other gauge lights and it'll cut off in the middle of driving and do the same thing?

check your battery terminals for corrosion. also check for loose wires usually found at the starter or engine ground. also have battery checked for a bad cell.


Why does the battery light stay on while driving and the temp and fuel gauge is not working?

Sound like the Alternator or possibly the Regulator died. Get it checked and fixed before it completely destroys your Battery.