answersLogoWhite

0


Want this question answered?

Be notified when an answer is posted

Add your answer:

Earn +20 pts
Q: 1986 GMC Vandura rear door hinge pin is broken?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you use hinge in a sentence?

Perry Mason's entire case will hinge upon this very point. The door will not swing without a hinge.


How do you repair a broken door hinge on a 1991 Cherokee Briarwood where it should be welded onto the frame?

To repair a broken door hinge on a 1991 Cherokee Briarwood, a new piece of metal should be welded in to hold the hinge. Then, a new hinge should also be welded in that is aligned with the door pin.


Does the door hinge adjust where the hinge is attached to the hinge post?

door hinges attached to door and hinge post


How do you replace the door catch on a Volvo s70?

This link is titled "door hinge", but actually pertains to the catch-strap: http://volvospeed.com/vs_forum/index.php/topic/79630-how-to-repair-a-clunking-grinding-broken-door-hinge/


On a 1998 Holden VT Commodore Acclaim is it possible to replace or repair a broken door hinge on the drivers side?

Broken off the door or from main body? Main body- Prefabricate. Door- replace door.


Why does one buick regal doors have no power at all?

Broken wire in hinge area of door


Repairing door hinges 1990 Lincoln Town Car?

NOTE: Front and rear door hinge checks can be removed and installed using the same procedure. NOTE: The front door hinge check can be serviced without removing the complete hinge assembly. Perform the following procedure: Removal 1. Open door with broken hinge check. 2. Remove exposed hinge-to-body retaining bolt and retain. 3. Insert a chisel, 267mm (10-1/2 inches) long with a 19mm (3/4 inch) cutting blade, between hinge half on body and back side of hinge check. Hammer until chisel unseats rivet securing hinge check-to-body side hinge. 4. Remove broken hinge check and discard. Installation 1. Loosely place new door check and elastomer reinforcement into body door hinge. 2. Install door hinge-to-body retaining bolt to secure new hinge check and reinforcement-to-body side hinge. Tighten bolt to 25-35 N-m (19-25 lb-ft).


What is the name for pin that slides into a door hinge?

door hinge pin


Door on 1997 Chevy lumina will not close could the latch be broken or should you just play around with it?

Lift the door from the bottom if you can move it up and down your bolts on the door to hinge bolts could be loose or the main pin that hold the door hinge from the car and door may have elongated the hole making the door drop down.


How do you change door hinge pins and bushings on a 1986 Chevy half ton pickup?

I would recommend you replace the entire hinge and forget about repairing it. In my experience this is the best route to take.


Why does nothing rhyme with orange?

Bro, DOOR-HINGE. Door-hinge rhymes with Orange.


What is door hinge?

A door which hangs on hinges. The hinge is what allows a door to open and close and is made of metal, attached to the door by bolts or screws.