It means that your alternator is on it's way out. Same thing happened to me on a Liteace.
how to repair 1999 Toyota Camry radiator hose upper connection pipe
To flush a Toyota Previa radiator, first drain the antifreeze in the radiator into a bucket. This is done by turning the valve at the bottom of the radiator. Close the valve and add a radiator flush product purchased at an automotive parts store. Follow the directions on the bottle of flush. This usually means running the vehicle for a certain amount of time and then draining the radiator again.
First of all, check the thermostat, the radiator fan, radiator hoses, water pump, radiator leaks. P.s. If you install a radiator fan universal and it don't place really close to the radiator, you can have that problem
follow the radiator top hose back to engine the thermostat is there under that domed connection
Where is the radiator drain plug in a 1995 Toyota Camry
bottom of radiator
The radiator capacity for a 1998 Toyota Camry is two gallons. This includes coolant stored in the engine block and radiator.
The radiator is located in the front of the car, where it is located in most cars. There are coolant pipes running beneath the car, under protective covers, that feed coolant to and from the radiator. There are three drain plugs on the car, and it is a complicated system to flush.
Following the hose that leaves the Radiator , usually on the right ( driver's ) side, you will find it connects to a section at the engine: this connection is where you access the Thermostat.
A radiator is held on the mounting brackets. Before removing the radiator on a Toyota Starlet it will need its coolant drained. Remove all the mounting bolts and disconnect the hoses to pull the radiator off.
To remove a radiator from a 1997 Toyota Tacoma the truck needs to be cooled down. The coolant needs to be drained, and loosen the radiator mounts. When everything is loosen remove the radiator.
They are a supplier of Toyota Cars and parts