Want this question answered?
.24mm intake and exhaust [cold engine] ref: misubishi Jeep service Manual 4dr5
cold Look up the specs in a shop manual, it will indicate if the adjustment is done H (hot) or C (cold).
electric chokes work on heat and electrical power to do the adjustment, manual chokes YOU are the adjuster as you drive u move a choke knob for the adjustment.
Purchase a Haynes or Chilton's repair manual at any auto parts store. Here you will find all the valve and torque specs.
We were told to read the manual before we entered the classroom.They did a manual search of the files.The car had a manual transmission.Manuel, what page in the repair manual will tell me how I will make a manual adjustment to the manual transmission?
no adjustment on the 5speed manual transmission with overdrive. hydraulic clutch
The 1993 Mercury manual transmission linkage will have adjustment nuts on each end of the linkage. Turning the adjustment nuts will move the linkage back in forth.
Perhaps clutch needs adjustment or replacement
Coud be linkage adjustment Or something internal
Clutch needs adjustment/replacement Synchonizers worn?
Valve Lash Adjustment On 1986-92 Isuzu 2.3 & 2.6L Engines AERA member have expressed some confusion on the correct valve lash adjustment procedure on 1986-92 Isuzu 2.3 & 2.6L engines. It appears that previous service manual information may lead a technician to an incorrect adjustment. The service manual indicates that valve lash on the #1 cylinder should be adjusted when all timing marks are lined up. The camshaft however, is in the valve overlap position at the number one cylinder. If the adjustment is made as indicated in the manual, excessive valve lash will result. These engines are actually timed off the #4 cylinder and those valves can be adjusted when all timing marks are lined up. To correctly adjust the valves, first look to see that the cam lobes are pointing down in the cylinder you are adjusting. The correct adjustment is made on a cold engine and is .008 for both valves on the 2.6L engine. The adjustment for the 2.3L engine is .006 for intake valves and .010 for exhaust valves.
The clutch has an automatic adjuster therefore there is not a provision for a manual adjustment.