OM617.952 COLD adjustment: Intake 0.10 MM Exhaust 0.35 MM Hot adjustment: Intake 0.15 MM Exhaust 0.40 MM
8 intake 12 exhaust ????
valve adjustment. .03 intake .04 exhaust.
Intake manifold delivers the fuel air mixture to the cylinder heads, exhaust manifold collects the gases after combustion, and channels them into the exhaust pipe.
Please restate your question.
1342 Intake Compression Power Exhaust
Intake = 0.003" Exhaust = 0.004"
Intake- 0.20 exhaust- 0.25
.003 on intake and exhaust
Intake is .13-.18mm Exhaust is .18-.23mm
.0015 intake and .0025 exhaust
I need to adjust the the intake , exhaust valve. would you know how ?
my clymer states 0.08mm (0.003in) intake and exhaust
.004 intake.....006 exhaust
INTAKE .006-.007 IN EXHAUST .008-.010 IN
Your exhaust lines up with exhaust pipes ,your intake lines up with your intake runners.
The exhaust lifters will line up with the exhaust manifolds,Remove the valve cover if your working on a V8 and the valve that lines up with the exhaust port will be the exhaust valve,If it is a Chevy V8 they will be from standing in front of the car exhaust,intake,intake,exhaust,exhaust,intake,intake,exhaust.
look at the head with the valve cover off find where the exhaust manifold goes in tha is the exhaust valve or looking at the valves the first one is exhaust then intake then intake ,exhaust,exhaust,intake,intake,exhaust if you have the head off i think the intake valves are bigger than the exhaust
-intake: exhaust closed, intake open -compression: exhaust closed, intake closed -combustion: exhaust closed, intake closed -exhaust: exhaust open, intake closed
Honda-Tech.com dseries.org google lol and of course... chiltons or haynes
the intake are next to the carb and the exhaust are next to the exhaust manafold intake are .008 exhaust are .012 with the engine warm good luck
Engine needs to be cold when performing overhead adjustment. Spencer's is .16" intake and exhaust valves closed.
Air and fuel intake, compression and ignition, combustion and expansion, exhaust