Check the wiring harness at the frame at the rear of the vehickle. It sounds like a direct short which is caused by the wire rubing on the frame.
I just had the same problem and found that my rear turn light bulb went out and the turn signals no longer worked. Check any of the turning bulbs. You may have replaced the hazerd light flasher. There are two flashers, the turn signal one is near the hazerd one under the dash.
CHECK FUSABLE LINKS AND THE IGNITION SWITCH.FOR 12VOLT REF
Toyota Tsusho Corporation (TTC), a Japanese trading house that worked with other companies to find the right markets for their products
A compression test will help determine if the valves need to be worked on. Burnt or carbon build-up on valves will certainly affect acceleration.
I replaced the water filter about two weeks ago. Everything worked fine for about a week. Now it does not cool
No. He was British and white. He invented a form of the traffic light which resembled the railroad signals where he worked.
kim kennedy blair
The historicians are conformed that it worked not very well and that's why it had to be replaced by empire.
You say the fuses are fine, i have just had the same problem. is your radio/headunit also not working??? And have you checked the fuses under the bonnet aswell as in the drivers footwell. I just replaced some of my fuses and it worked fine. Make sure your inginttion is off whilst removing/replacing fuses.(unless testing to see if it worked) Hope this helped!
Check plugs and plug wires---worked for mine.
you would adapt one.
I replaced my 1995 S10 2.2 engine with a 2.2 cavalier engine and it worked fine.