You did not do the whole system properly and I can't guess why without having been there when you did it. Light means that the front and back systems pressures are not balanced. Proportioning rod in the metering block is pushing from the higher system causing the switch to be actuated. Learn how brakes work before you do anything to anything to do with brakes. Brakes MUST be serviced in their entirety or not messed with at all! Take it to a brake shop!
try the brake switch on the back of the brake pedal
DOT 3
It is just above the brake pedal. The switch rests against the brake pedal lever.
Sorry, we can not do diagrams. - See Haynes Manual.
Low brake fluid and the parking brake being on are the two most common causes.
After the proportioner valve, there is one for each wheel.
Usually on the upper end of the brake pedal
Pads only --approx. $30.00
e-mail millerannap@hotmail.com I will send you Diagram
Just above the brake pedal. The switch sets against the arm of the pedal.
Yes. The brake calipers are side specific.
6"