0
1995 Sportster with a 27 tooth frt belt drive pulley you know you can put a 29 tooth on it Is there a 30 or 32 tooth pulley that will fit easily?
Franklin1122
Hi:
Both a 30 & 32 tooth pulley is available for Sportsters, 1991-2011. See the following website: 883Sportster.Webs.com
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What size is the rear pulley on a 2009 harley Davidson flhx?
1" belt with 140 teeth and a 68 tooth rear pulley with cush drive.
What size is the rear pulley 1992 fxstc harley Davidson?
'84 through '92 Softails have a 70-tooth rear pulley, '93 Softails have a 61-tooth pulley, '94 through '99 Softails have a 65-tooth pulley and '00 and up Softails have a 70-tooth pulley. '84 through '99 Softails use a 1-1/2" belt and 2000 and later Softails use a 1-1/8" belt.
Harley sportster 883 gas mileage?
For around town there is not much that can be done to improve gas mileage beyond regular maintenence and driving habits. However, for high speed cruising, 60 mph and above, the 883's respond very well to taller gearing. Unlike offshore bikes designed for high rpm (~4,000+) with relatively low torque, Harleys are designed with high torque for low rpm work, 2900-3100 rpm. For 1991-2003, 883's if you ride mostly above 70 mph you can use a 30 tooth front pulley. Speeds below 70, or mostly around town want a 29 tooth. For 2004-Up, 883's for the same as above want a 32 front pulley. And for speeds above 70 mph want also a 66 tooth rear pulley. Pulleys are available on the web, just do a search for "Sportster Front Transmission Pulley".
What size of rear pulley and part number 2011 street glide?
68 tooth
What is the function of the cement of a tooth?
so your tooth stays in place. If the cement wasn't there your tooth would fall out pretty easily
Is a motorcycle belt drive smoother than a shaft drive?
Ok the shaft drive is smoother as long as the shaft and bearings are maintained properly the belt drive will be close to the same smoothness but will have a slight vibration due to the design of the pulley teeth or cog and the belt tooth contact area. and the belt needs adjustments more often. hope that helps
Can you use a 25 tooth sprocket and a 8 tooth drive?
no you can not 25 with 8
How can you print from your laptop without a USB?
this can easily be done using red-tooth.. Just like mobile phones which use blue tooth to transfer ahesteryiakedata (data) from one handset to another. If configured correctly using win32.exe you can print out without a USB. You can also do this by re-formatting your hard drive and installing red-tooth from scratch.
What size rear pulley is on a 1995 dyna wide glide?
Rear wheel pulley should be 70 tooth. A 65 will give you better highway mileage and lower rpms, but will require a belt change.
Where are the timing marks on a 1990 Acura Legend?
There are three timing marks. 1. pointer on lower front cover and notch on the crank pulley. The single notch is TDC. 2. pink tooth on cam pulley and yellow line on cover behind the cam pulley (rear cam) 3. pink line on cam pulley and yellow line on cover behind the cam pulley (front cam)
How do you calculate a gear ratio of a 5 tooth drive gear and a 15 tooth driven gear?
You take driven divided by drive. 15 divided by 5 is 3. So the ratio would be 3:1
How do you break a tooth?
Here are some steps to break your tooth easily and harmless: 1) Pull it out with your fingers or with a tissue if it's loose 2) Tie it to a rope and pull it out easily 3) Put your tooth on the window and quickly close on it and while the window is closed, pull 4) Eat an apple (Or crunchy food)
