DID YOU EVER SOLVE PROBLEM ,, THIS IS THE SAME THING HAPPENING TO MY TRUCK?
The solenoid is attached to the starter. Replace the starter.
how to change vvt solenoid 2000echo
Assume you mean starter solenoid; most GM starters have the solenoid built in. To change it, just replace the starter.
What does the solenoid control?
That depends on which solenoid it is.
Starter solenoid?
Remove the starter. the solenoid is mounted on the starter.
Remove the transaxle side cover (behind left front wheel). You will see some wires coming from a plug at the top forward facing bit of the transaxle running (inside tranny) down, then rearward to a solenoid. Remove the one mounting screw from the solenoid and remove the solenoid and wires. Install new unit in reverse order. Always replace transmission filter when replacing lockup solenoid.
A bad transmission solenoid will cause hard shifting and can eventually damage the unit. You should change the solenoid if it is bad.
Which one?
Begin by removing the wiring harness from your shift solenoid. Remove the shift solenoid retaining screws. The shift solenoid will come out. Reverse the process to install your new shift solenoid.
i believe the solenoid is part of the actual starter motor. you have to change the whole starter.