i have a 95 Ford aspire automatic..rebuilt the trans but high gear and reverse does not work when wheels are on the ground...no power..what can i do
I have the answer to both questions email me at elccabron@hotmail.com
and I will send the diagram and the service prcedure to fix the no reverse and 3rd gear problem
Motorcraft Mercon Automatic transmission fluid according to the manual ( For the automatic and the manual transaxle / transmission )
I don't know if the 1995 is the same , but the ( 1996 ) Ford Aspire uses Motorcraft MERCON automatic transmission fluid in the manual trans-axle ( manual transmission )
The ( 1996 ) Ford Aspire Owner Guide shows that Motorcraft MERCON automatic transmission fluid is used in the automatic and manual transaxles ( transmissions )
The 1996 Chevy Camaro automatic transmission has a fluid capacity of 7.3 quarts. You can check the automatic transmission fluid level with the transmission dipstick.
the transmission that is in a 1996 f150 is a 4r70w if automatic
On a (1996 ) Ford Aspire , 1.3 liter four cylinder engine : With engine oil filter change : ( 3.6 U.S. quarts , 5W-30 is PREFERRED according to the Owner Guide )
700R4
Automatic transmission fluid.Automatic transmission fluid.
mercon dexron3 atf
It can come with either one. But the standard is an automatic transmission.
The speed sensor on a 1996 Pathfinder 3.3 automatic transmission is in the engine compartment. It is on the transfer case.
On a 1995 Ford Aspire : If you stand at the front of the vehicle and look in the engine compartment the automatic transaxle fluid dipstick is in the area to the LEFT of your battery ( according to a drawing I was looking at of the engine compartment of a 1996 Ford Aspire )