If you pick up a Haynes or Chilton manual for the car, it will show you how to remove and replace the ignition switch. You might be able to find out why it won't turn without having to replace it.
Another option would be to call a locksmith.
cylinders in lock are bad-spring in ignition is broken and jammed-wrong key?
The key is probably jammed into the ignition by the parking brake you put there
there is a little hole under the key switch take a pen and push the little button up and then the key will come out it is from the park cable is jammed
Never mind figured it out
There may be something jammed inside your ignition. If this is not the problem then you will need to have a new ignition installed.
The Steering Wheel lock is jammed! Gently wiggle the steering wheel back and forth as you try to turn the ignition key.
B
So it would seem. If the ignition is in the column it may also be jammed by the steering wheel lock. Try turning the steering wheel and holding it while turning the ignition key.
You can't repair it you can only replace it.
Either it's the wrong key, the steering wheel is jammed hard against the steering wheel lock or the key mechanism has failed.
Your motorcycle ignition could be jammed due to damaged parts in the ignition, an ECU safety feature, lack of lubrication, or the key itself could be damaged. If the key is stuck in the ignition, we suggest calling a locksmith before forcing it out. Motorcycle ignitions are more complex than ever, with intricate fuel mapping and ECU regulation. Troubleshooting a motorcycle key thatβs jammed in the ignition can be time-consuming.
If the ignition chime will not turn off on a 1994 Ford tempo the switch for the sound is jammed. The steering column with have to be removed to access the switch for the ignition chime.