If your sure it's a rod bearing, Then the rod bearing has either spun in the rod cap are just beat the rod bearing out from lack of oil. The engine will need to be pulled out, tore down and inspected real good to find out what caused it in the first place.
You will then find out that you need to put a crank kit in it and recondition Rod / rods.
Also replace oil pump ect...
Your best bet would be to find enother engine that you can HEAR RUN and buy it. Are you can rebuild your old one correctly for about 1500 $s if you do ALL the work.
A bad ring would probably chatter in the cylinder and cause serious oil consumption. Knocking would most likely be either bearings (typically rod) or piston slap which is a common trait of a 350. Piston slap isn't serious as long as it clears up within a few seconds of starting the engine. Rod knocking means you get to rebuild/replace the engine or wait for a rod to go through the side.
problem with the abs, get it fixed
If you do, you will only do more damage. Time to overhaul or replace.
light slapping knock is a piston knock a loud heavy repetitive knock is a connecting rod Very Bad
Bad bearing? Bad connecting rod?
The condition may possibly be piston slap.
Fuel pump is my guess.
yes
Tim Allen does the Chevy Silverado HD commercial, but Dylan Bruno does other Chevy commercials (Cruze, Silverado).
cAN YOU LEGALIZE A 2001 CHEVY SILVERADO IN MEXICO?
YES they are the same.
injectors 6.6 Chevy silverado