Superman of course! (WHATEVER 2 WHOEVER WROTE THIS)
went thru this with my husband's car and it is easy to fix. take a flat head screw driver and CAREFULLY pop out the unit which has ALL the main controls 2 the windows. When you get this out, there will be a wire connector connecting the wires together, CAREFULLY disconnect this. make sure you bring a flat head screw driver with you and then visit your local junk yard and show them the part you need and they will take you out to a wrecked car. just take the part out the same way you did your car. when home, connect the wires and BE CAREFUL putting the part back in -DO NO SHOVE IT IN - this will cause it 2 fall inside the door panel. Your windows WILL work when done. GOOD LUCK!
The Chevy lumina does not have an inertia switch.
The windows use a switch which is in the door.
Check the drivers side switch panel for the switch that locks out the passenger windows from working, make sure it is not on.
I need a Diagram for a 1995 Chevy Lumina iginition switch??
Wire, Switch, Motor, window regulator.
does the 1998 Chevy lumina have a fuel shut off switch
The safety override switch is probably on. If not, then the motor or switch may be bad.
On the top of the drier at the passenger side firewall Wrong the pressure switch is on the ac line under te air cleaner assl. There OS no drier on the fire wall it is before the switch .
What is the question?
It is quite easy to install the 1992 Chevy Lumina brake light switch. The brake light switch simply plugs in and out.
* The fuel shutoff switch is on driverside against the leftside kick panel near the firewall
The switch is located on the driverside just past the fuses towards the break pedal.