answersLogoWhite

0

1998 Park avenue stalls at idle?

Updated: 10/24/2022
User Avatar

Wiki User

14y ago

Best Answer

Check idle speed rpm & adjust higher if lower than it should be. Mixture if it isn't.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: 1998 Park avenue stalls at idle?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What causes 1989 Park Avenue stalls?

My 1998 Park Avenue stalled. I cleaned the idle air control valve (IAC) and now it is fine.


What could cause a 1998 Buick Park Ave Ultra-bucks and stalls when started and idling-fine when accelerating?

My 1998 Park Avenue would not idle. I cleaned the Idle Air Control Valve (IAC) and the cavity it fits into with carb cleaner. Now it works fine. My 1998 Park Avenue would not idle. I cleaned the Idle Air Control Valve (IAC) and the cavity it fits into with carb cleaner. Now it works fine.


What causes bad idle in 1997 Buick park avenue ultra?

what is the down side of the 1997 buick park avenue


How do you turn up the idle on a 1994 park avenue?

Computer controlled not adjustable


What causes a Park Avenue to run rough or misfire and stall at redlights?

Check the Park Avenue EGR valve for a clog. A clogged valve can cause a rough idle and stall at a light.


1995 lebaron only stalls in park?

probably has a low idle, try upping it, could use a tune up probably


What is the stock engine idle speed for a 1987 V6 Buick Electra or Park Avenue?

700 RPM


Your 1995 3000gt mitsubshi stalls when you stop but starts right up when Idle drops it stalls?

the idle jet in the carb is blocked and needs to be cleaned out and reset


3.8L stalls at idle warm Tach goes to zero then stalls?

Most likely the ignition module.


Why my Honda civic 2000 starts then idle drops and stalls?

Idle Air Control Valve.


1988 Chevy truck wont idle and stalls when put it in drive but will run if you hold the gas down in park i put new fuel pump on plugs and wires and cap.?

Carb needs curb idle adjusted or rebuild.


Why would a car stall shifting from park to reverse?

A car might stall when shifting from park to reverse if the idle is set too low. It is also possible that the engine stalls because it is not fully warmed up before shifting from park to reverse.