I have the same problem. You need to replace the interior light relay located above the fuse panel. You have to pull the the kick panel off to get to them. It is located on the left side of 3 relays going up in a row. To find the right one, put the fuse in for the lights and pull the relays until your lights go out and that is the one that needs replaced.
Hazard Light versus Dead BatteryNO, IF the battery is truly dead, then the hazard lights will not work.However, if there is some power left in the battery, even though the voltage may be extremely low, then the hazard lights maycontinue to work.
Flasher stuck in closed position defective switch
Doesn't have hazard lights.
It is the fuse for the hazard lights or as they are sometimes called, emergency lights.
get the whole care re wired also dont turn on your hazard lights!!!
If you will notice the hazard lights are not actually flashing, reason being, the hazard flasher relay is defective. Replace it.
if you mean: "why do hazard lights flash when brakes are on", then the answer is because vehicles are equipped with a hazard light relay that supercedes the brake lights. This way, slow moving vehicles can operate under hazard lighting.
the location of the hazard lights is on top of the steering colum.
This bike does not come standard with hazard lights. There are many vendors that sell add on kits that can supply hazard lights. Two of the top web sites are jpcycles.com and denniskirk.com
bad fuse or hazard switch
Hazard lights are used on a vehicle in an emergency. The driver is supposed to turn the lights on the warn others that their car is experiencing some sort of problem.
Pull the hazard light fuse.