bad fuse or hazard switch
It's the turn signal indicator-located behind the hazard lights.You have to take it out and replace it.
It needs checked out but both the hazard and brake lights go through the turn signal switch.
signal lights not working.
turn signal switch needs replaced!
Bad bulbs? Sockets corroded?
The fuse for hazard and signal lights on the Nissan Serena is in the fuse box, bottom row. The flasher fuse for hazard and signal lights is located in the dash just to the left of the radio.
If the turn signals on a car works but the hazard lights do not there may be a problem with the flasher switch. The flasher is located in the steering column, and a damaged unit can cause the lights to stop working.
you should try checking the fuses and replacing the bulbs the fuses for thos lights should only be about a 10 or a 15
you need to change the flasher can for the signal lights
The turn signal and the hazard lights each have their own relay. Sounds like you have to replace both relays.
If your hazard lights don't work but your turn signals do work it could be that your Hazard Lamp Flasher needs to be replaced. Your car has both a "hazard lamp flasher" and a "turn signal lamp flasher". Your "turn signal lamp flasher" is working but your "Hazard Lamp Flasher" may not be working. Buy a new "hazard lamp flasher" and install it. The hazard lamp flasher is located behind the instrument panel to the left of the steering column.
Turn signal relay needs to be replaced. If you turn on the hazard (emergency) switch, all the signal lights should come on. This says the lights are okay.