answersLogoWhite

0

1999 Mercury Sable wiper switch replacement?

Updated: 8/16/2019
User Avatar

Wiki User

14y ago

Best Answer

you have 3 screw in the lower plastic steering wheel cover - star head screws. Undo the screws and snap the upper case off. There are 2 torx screws holding the switch to the steering column. Undo the screws and pop off the 2 wire harnesses. Should take less than 10 minutes. switches can be found at Napa Auto - approx $87 plus tax. Good luck

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: 1999 Mercury Sable wiper switch replacement?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change the rear wiper blade on your 2001 Mercury Sable?

The 2001 Mercury Sable has the most common hook-end wiper arms on front and rear. See the Sources and Related Links section below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


What is fuse 17 on 99 Mercury Sable?

On a 1999 Mercury Sable : In the fuse panel by the brake pedal : ( # 17 is a 30 amp fuse for the front wiper / washer )


What are windshield wiper sizes for 1993 Mercury Sable?

The 1993 Mercury Sable takes 20" replacement windshield wiper blades on both sides front (and a 14" rear wiper blade if applicable). See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


How do you change the rear wiper blade on a 2003 Mercury sable?

They changed the length of the rear wiper blade mid way through the year. To be safe, go with the 16" rather than the 18". The 2003 Mercury Sable has the most common hook-end wiper arms. See the Sources and Related Links section below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.


Why do your intermittent wipers not work properly on your 1994 Mercury Sable when Regular speed works but when i switch to intermittent wipers I have to wiggle the stick whenever I want it 2 wipe?

There could be a bad or melted electric connection on the wiper switch connector.


Where is the wiper control module located on a 1995 Mercury Sable?

The wiper control module is mounted on a bracket near the steering column support bracket.


Why My wipers won't shut off on my 1996 Mercury Mystique?

Typical Ford wiper switch malfunction. The wiper switch needs to be replaced.


What size wipers for a 1996-2002 Mercury Sable?

1996-2002 Mercury Sable Replacement Wiper Blades:Driver side: 24"Passenger side: 20"Rear: 18"See sources and related links below for more information. Since there are currently over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.


Rear wiper switch location on mercury tracer?

The switch for the rear wiper is on the same lever as the front wipers. It's a circular switch that turns forward & backward.


What size windshield wiper blades are used on a 1993 Mercury Villager?

The 1993 Mercury Villager takes 22" replacement windshield wiper blades on both sides front.


How do you change the rear wiper switch in a 1997 Mercury Villager Van?

The switch just pops out of the dashboard.


What size wipers for a 1992 Mercury Sable?

The 1992 Mercury Sable wiper blade sizes are 20" wiper blades on both sides front and a 14" rear wiper. See sources and related links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only - be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.