If the electric door lock is frozen on a 1999 Suburban, a hair dryer can be used to warm the area of the door where the lock mechanism is. If the key entry is also frozen, there is a lock de-icer pen that can be used to spray away frost in the keyhole.
with a brick
Check the switch first to see if it's getting juice (bypass) If it is, see if motor is binding. You will have to pull panel on said door.
remove the inner door panel, you can access the bolts from the inside of the door.
does it have a child proof lock syetem that locks from drivers door?
whats the problem?
To remove the door of a 1999 Chevrolet Suburban, first, ensure the window is fully closed and disconnect the battery to prevent electrical issues. Remove the door panel by unscrewing any screws and carefully prying it off to access the door's internal components. Disconnect the wiring harness and any supporting brackets, then remove the bolts securing the door to the hinges. Finally, carefully lift the door off the hinges to complete the removal.
You can fix a sagging door on a 1996 Suburban by replacing the door pins and the bushings.
If it was built after the 6 month of 99 then it will work. but if it was built in the early month of 99 then NO. look at the sticker on the door jam and you will see that info.
rear door-remove the door panel. back speaker carefully pry off grille cover and replace speaker
what size are the door speakers for 2003 chevy suburban
I'm having the same problem. Relays working fine and door locks have some movement, but do not lock or unlock all the way. Hope we find out the problem.
Under the truck, inside the frame rail on driver side, almost straight in from driver's door.