this indicates that either you have oil on the clutch from a failed rear main oilseal or an indication of clutch wear
Clutch plates are sticking - get your clutch checked you might need a new one
It doesnt work because oblivion has been running for a long time in alton towers and the clutch has now been over used so i doesnt work
check oil level in your hydraulic clutch if you have a hydraulic clutch. If not and it is a cable clutch check and make sure your clutch is adjusted properly. It may not be disengaging when you pull the clutch lever.
Probably do to a bad pressure plate and or clutch plate. I would first check linkage adjustment and slave cylinder before changing clutch.
An emulsion
The clutch is non-adjustable. It uses hydraulic fluid to release the clutch. If you are experiencing a dragging clutch, check your plates for warpage. This bike uses a 'slipper' type clutch so having the correct plates in certain places is important. If you have not changed your plates and they are the originals, check that the clutch fluid doesnt have air in it.
Turn the clutch by hand!
The wires are coated in rubber.
as long as the blood doesnt go to their head
You have no clutch left. May of worn to the point it's not grabing or the clutch face may have blown off all at once. If you dump the clutch to often it can go all at once.
clutch slipping????
Because a giraffe has a long neck doesnt mean it sleeps standing. like sheep it curls itslegs under its body. -McGreggle-