Hi peoplz
There is a backup switch in the gearbox. When you shift into reverse, the gear box switch contacts the switch and lights the white reverse lights. If you find that the reverse lights don't work it could be that the switch is not being triggered by the mechanism inside the gearbox. This is providing that everything else is working; wiring,bulbs,etc.
Check the switch
check the interior switch for where.
answer: replace the headlights switch.
Of course ,first check the fusebox. If all fuses check out ok, I think the headlight switch is bad. I had a problem with indicator lights and my running lights were not working.(Tail lights,). I tried everything and finally replaced the headlight switch and that fixed it! About $25.00
The circuit requires the hi/lo switch. You'll need to get a replacement switch for everything to complete the headlamp circuitry.
The brake light switch is stuck or out of adjustment. If it is a mechanical switch it is located somewhere on the brake pedal swing arm. If it is a pressure switch it is located near the Master Cylinder.
Check for a blown fuse Check the operation and alignment of the stoplight switch
replace brake light switch located on brake pedal under dash
A "dimmer" switch will change the brightness of lights.
check fuses then check all the bulbs, then check the turn signal switch the brake lights work through it
No, the fog lights have a switch.No, the fog lights have a switch.