It is possible that a part of the EGR valve has fallen out. This will cause a very loud exhaust noise.
You have to remove the exhaust manifold to get to the starter.
They are screwed into the exhaust pipe, behind the engine.
They are screwed into the exhaust pipe, behind the engine.
right rear of engine connected to exhaust manifold.
Remove the front exhaust manifold and remove it from the top.
It is in the exhaust pipe on the back of the engine.It is in the exhaust pipe on the back of the engine.
The exhaust, rear drive shaft, and fuel tank have to be removed.
The valve needs replaced. There is a metal plug that has fallen out.
The oxygen sensors are screwed into the exhaust system. They are not under the lower intake.
Remove the front exhaust manifold and remove the starter from the top.Pull the front exhast manifold and dipstick remove the 3 bolts with a 15mm socket or wrench pull the starter from the top
Trottle sensor...
If same engine, yes.