Want this question answered?
Sure
Honda 300 ES reverse procedure: 1. Push handlebar mounted reverse button 2. Pull in clutch 3. Blip throttle to prevent stalling if cold. 4. Reach right hand down to lower left side of engine and pull up lever. 5. Release clutch and apply throttle.
same as motor gn4 Honda motor oil
10w-40 motorcycle or ATV oil will work just fine.
will a 300 honda motor fit a 350 honda rancher
You will be fine with 10w-40 ATV or motorcycle oil designed for wet clutch engines.
10w-40 motorcycle or ATV oil designed for wet clutch engines.
on the left hand grip is a red button push it in and apply the left brake,push your foot shifter down and you will be in reverse.
You press the button on the left hand brake that has an red R on it then you down shift.
I have a Honda 1986 TRX200sx ATV and i am looking at the same thing ive looked online and edelbrock has carburetors but they are all for higher CC's and newer models so i don't know what have you came up with OR just goto the Honda dealer and buy a jet kit for that model prolly 20-30 dollars..take the carb apart and count the turn out for each jet and right it down replace the jets and float and seat valve needle valve...put back together and good as new!!or you can buy a new 300$$ carb and pay a pro to jet it for you..its your choice,id rebuild it for cheap, its old and id even rebuild with a new ATV
I have a rubicon 2004 the oil capacity is 5.2 to 5.5 quarts. You have to put 5 quarts in and crank the 4 wheeler and let it run for 1 minute and check the oil as soon as you turn the engine off to see if you need to add .2 or .5 to your rubicon. The ? is about a Honda Rubicon ATV.
theres a little red button on the left handle bar push that down then pull that brake lever in and shift down untill it goes into reverse