To put a 2011 Honda Rancher 420 in reverse, first ensure the ATV is at a complete stop. Then, locate the reverse override switch, typically found on the left handlebar; press and hold it. While holding the switch, shift the gear lever to the reverse position, which is often marked with an "R." Release the switch, and you are now in reverse.
The shifting sensor on a Honda Rancher 420 is located on the lower, back side of the motor, to the left of the reverse switch. You must remove the skid plate to access it.
You press the button on the left hand brake that has an red R on it then you down shift.
15hp
the rancher 420 does not have a cvt so there will be no cvt intake
It is a 420cc motor. Such as a Honda Fourtrax "400" is a 400cc.
how can my sprayer be connected to my new4 wheeler Honda racher 420
not 100% shure but since 2007 is a 420 and 2002 is 350 and the 350 has a carb and 420 fuel injected but if so i might do it to my 06 rancher
bike is not shifting
57 mph
While stationary and in neautral there is a red button on the left handlebar on the rear brake lever. You need to push this down and pull the brake lever and then you can push the foot gear selector down for reverse.
The spark plug on a 2011 Honda Rancher TRX 420 is located on the right side of the engine, near the front. To access it, you may need to remove the plastic cover on the right side of the frame. The spark plug is threaded into the cylinder head and can be removed with a spark plug socket.
Servicehonda.com