0
6.8.1 skills integration challenge-planning subnets and configuring ip addresses?
Wiki User
∙ 10y ago
6.8.1: Skills Integration Challenge-Planning Subnets and
Configuring IP Addresses
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
Where do you get your subnet number from?
You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).You (the network administrator) decide what subnet you need to use, depending on the available IP addresses, and how you want to divide your network into subnets (in case you use subnets).
What is ment by subnet?
It means that a larger network has been divided into smaller networks, called "subnets". Each subnet has its own range of IP addresses, that should not overlap with the other subnets.It means that a larger network has been divided into smaller networks, called "subnets". Each subnet has its own range of IP addresses, that should not overlap with the other subnets.It means that a larger network has been divided into smaller networks, called "subnets". Each subnet has its own range of IP addresses, that should not overlap with the other subnets.It means that a larger network has been divided into smaller networks, called "subnets". Each subnet has its own range of IP addresses, that should not overlap with the other subnets.
Which class of ip addresses offers the most flexibility for subnetting by providing for the largest number of hosts?
A class A would give you the most flexibility in terms of subnets and hosts per subnet. You could use up to 23 bits of information for subnets.
What is a subnet mass?
An area of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP Addresses have the same prefix. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask.
How many bits are borrowed for the subnet?
Subnets are created in powers of 2 due to the way netmasks work. To accomodate 10 addresses, you would need a /28 (255.255.255.240) netmask, which would provide 14 usable IP addresses. Here are the details of that mask in a private network address area (192.168.x.x) Output from the unix "ipcalc" program: Address: 192.168.1.0 11000000.10101000.00000001.0000 0000 Netmask: 255.255.255.240 = 28 11111111.11111111.11111111.1111 0000 Wildcard: 0.0.0.15 00000000.00000000.00000000.0000 1111 => Network: 192.168.1.0/28 11000000.10101000.00000001.0000 0000 HostMin: 192.168.1.1 11000000.10101000.00000001.0000 0001 HostMax: 192.168.1.14 11000000.10101000.00000001.0000 1110 Broadcast: 192.168.1.15 11000000.10101000.00000001.0000 1111 Hosts/Net: 14 Class C, Private Internet With the /28 netmask, 192.168.1.0 is the network address, and unusable. 192.168.1.15 is the broadcast address, and is also non-assignable. This gives 14 usable addresses. A /29 netmask (one bit less) gives 6 usable addresses. To create 10 subnets, the size of the subnets would need to be known, and the process is similar, but the subnets would have different start and end addresses.
What is a static length subnet mask?
That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.That probably refers to a situation where a larger network was divided into smaller subnets, but all subnets have the same size - as opposed to VLSM (variable length subnet masks), where subnets can have different sizes.
Assuming no subnetting what are valid Class B host addresses?
A classful class B network has a network range of 128 - 191. For host addresses, anything that is legal for an IP address in the last 2 octets would be a valid host address for a class B with no subnets.
What is subnetting?
Summary: A subnet mask is a way of telling your computer or router what network addresses it can consider local and which are remote.mcsgul@yahoo.com
An isp has a block of 1024 addresses.it needs to be divide the addresses to 1024 customers does it need subnetting?
No. If you have one IP per customer, you don't need to create smaller subnets. (You won't have enough addresses though - the first and last addresses of the block will be the network and broadcast addresses and won't be useable. You'll only have 1022 usable addresses)
What major tasks are required to create an Active Directory site in Windows Server 2008?
Prepare your infrastructure with the right IP addresses and subnets, configure a new subnet and site on the active directory sites and services
How many /64 subnets are available in a /48 prefix?
There are 65,536 subnets available in an IPv6 /48 block.
What is a subnet in computer networks?
A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet mask.
