It is not really answerable, depends on many factors.
Bolt size
thread pitch of the bolt
material the bolt is made of
that material the bolt is screwed into
lubricated/unlubricated and what with
what it was initially torqued to
If you have Snap on tech100/250 torque wrench it will give you a final torque #, I have seen torque readings double the intial torque # after the 90 degrees.
first torque to 60 ftlbs then torque to 90 ftlbs
30 ftlbs + 90 degrees cat 3306 torque now tell me the center to center distance lol
Start in the middle and work outward in a circular pattern. These steps 45 ftlbs, 65 ftlbs, 65 ftlbs, and 90 degree turn.
64 n/m + 90 degrees + 90 degrees
4 stage first 25n/m +90 degrees+90 degrees+90 degrees
30N.m, then 90 degrees, then another 90 degrees.
The torque depends on the engine if you have the 3.5L V6 you have to take steps first to 45 ftlbs in the right sequense and then to 65 ftlbs (twice) and then turn them an additional 90 degress. the 3.3l engine has 5 steps the first four are the same except you tighten the 9th bolt to only 25 ft lbs
7 nm then 90 degrees then another 90 degrees
There are 10 bolts. Start with the center bolt on radiator side and work outward in a circular pattern. The torque steps are 45,65,65 ftlbs and then a 90 degree turn.
90 degrees.
21.4 ft/lbs(29nm) + 90 degrees + 90 degrees
Some torque specs on head bolts require an additional angle torque after the initial foot pounds (or Nm) has been completed. Example, torque the head bolt down to 70 ft lbs then an additional 90 degrees. The torque gauge measures that 90 degrees for you so you can be accurate.