that is not a question
If you personally changed it, I would guess theres some air bubbles blocking the hoses.
You're Thermostat may possibly be stuck in the closed position, therefore not allowing coolant (water/antifreeze) to pass through to the engine. Basically check your thermostat is working.
Check your electric fan and see if it works, if it doesn't then theres your problem for both.
changed mine today its close to the starter follow the bottom rad hose to the block theres two bolts 10 mm should do it take of air intake and remove heater hose from head just to get it out the way
no if theres a hole , it broken . why is it over heating and how do you know its over heating, you cant look at it?
if you have a 2.5 the thermostat is located underneat the engine follow your lower radiator hose to it theres going to be 2 bolts i believe it is to romove the housing as soon as you have removed the housin the thermostat is right there
no but theres a new thing skywalk.
follow top radiator hose to intake. at the end of the radiator hose is the neck. theres two bolts pull the the neck off. that is where your thermostat is
Try checking your thermostat. It is probably stuck open.
How does the van run? It could be the headgasket, if you smell a sweet smell from the exhaust then its the headgasket. If not check the Oil, if theres like, water and stuff in the oil then it could be the headgasket still. The thermostat wont make it lose cool unless theres leakage around the thermostat housing gasket.
well anup is fat so theres a fact
nope....unless theres been another patch and they changed it....