There is a fill plug but to drain it you must take off differential cover and replace gasket onto clean mating surfaces.
There is no drain plug. Only a fill plug. You have to remove the cover to drain the rear end. Use RTV to reseal it.
yes there is it is a big nut on the rear of the rear end
There is a round plate that is bolted to the rear end housing on the back. You have to remove all the bolts and then the plate to drain the gear oil.
Sometimes there is no drain plug. Only a cover you need to take off and reseal.
If it is the rear one, Then you have to remove the rear end plate to drain it. The front has a drain plug just above the skid plate, on the right bottom side. and a fill plug above the drain plug.
The transmission dipstick on a 1999 Corvette is on top of the transmission. It is located in the engine bay, near the front. The Transmission on the 1999 Corvette is located in the rear of the vehicle. The Transmission also contains the rear end drive assembly. It is not located on the rear of the engine block as in a traditional vehicle. There is a Drain plug on the bottom of the transmission gear box assembly, as well as a fill/check plug on the side to add and check fluid levels.
The 2001 Honda Odyssey rear and drain hole is located on the bottom of the rear end. The drain plug can be removed with a half inch ratchet.
need to know what size tool to drain rear end on a Honda fourtrax
The oil drain plug is located under the front end of the car, on the rear side of the oil pan.
Uniess it has an aftermarket cover with a drain plug the only way is to remove the cover on the rear of the housing. (can be messy)
Does not have one. If you want to drain gear oil you remove the diff cover.
On the lower rear end or side of oil pan