move the wiper connection around while somebody presses on the brake if brake lights come on replace circuit board to wipers my 94 chevy 4x4 did that found by accident 3yrs later was about to trash the truck
start by checking your fuses.
Is it the taillights or the brake lights? If taillights it may be a wiring problem, If brake lights check the switch on the brake pedal
Do parking and dash lights work? If not, may be fuse most vehicles it is the same circuit
WHAT ARE YOU DUMB REPALCE YOUR LIGHT BULBS STUPID! Not stupid replaced circuit boards checked fuses ran test light . When headlights are on no brake light or taillights and have all new bulbs stupid. Turn headlights off brake lights work, so figure that out smart man
A blown fuse.
in dash lights
you dont
On my 2003 Chevy suburban the wiper blades don't stop when you turn off the switch sometimes, i would appreciate any help at all
you dont,
Need to specify which headlights you have... you either have the dual composite headlights, or you have the sealed beam headlight. In the case of the former, you rotate the harness 1/4 turn counterclockwise and it pulls out. You just replace the bulb. In the case of a sealed beam headlight, you have to replace the entire assembly.
generally at night.
You can only do this in park ... Turn off your truck ,apply the parking brake and turn your truck back on .